Corporation Port Devices Driver



This Linux* shell script utility uses the ethtool and ifconfig utilities common to most Linux distributions to gather and display your network devices' Make/Model, Controller, PCI Vendor and Device IDs, Driver Name, and Driver Version.

Driver installation (Using Windows 7 as an example) Turn on your PC power and boot Windows 7. When your CIU-2 is connected to the USB port on your PC, 'Installing device driver software' appears on the screen. However, the 'Device driver software was not successfully installed' appears on the screen next. Therefore, install the CIU-2 drivers as.


  • The package provides the installation files for FTDI USB Serial Port Driver version 2.12.16.0. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version.
  • For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following.
To run, at a command prompt, where this file is located type:
sudo ./netdriverinfo.sh
Requirements:

  • ethtool

  • ifconfig

  • root permission
Corporation port devices drivers
Corporation port devices drivers

Some distributions do not have ethtool installed by default. You may be able to install it by typing, at a command prompt type:
sudo apt-get install ethtool
Example output:
eth0 : 02:00.0
Make/Model = Intel PRO/1000 PT Server Adapter
Ethernet controller = Intel Corporation 82572EI Gigabit Ethernet Controller
VenID:DevID = 8086:107d
Driver name = e1000e
Driver Version = 0.3.3.3.-k6

This download is valid for the product(s) listed below.

This Linux* shell script utility uses the ethtool and ifconfig utilities common to most Linux distributions to gather and display your network devices' Make/Model, Controller, PCI Vendor and Device IDs, Driver Name, and Driver Version.
DevicesTo run, at a command prompt, where this file is located type:
sudo ./netdriverinfo.shPort
Corporation Port Devices driver

Corporation Port Devices Driver

Requirements:

Corporation Port Devices Drivers


  • ethtool

  • ifconfig

  • root permission

Some distributions do not have ethtool installed by default. You may be able to install it by typing, at a command prompt type:
sudo apt-get install ethtool
Example output:
eth0 : 02:00.0
Make/Model = Intel PRO/1000 PT Server Adapter
Ethernet controller = Intel Corporation 82572EI Gigabit Ethernet Controller
VenID:DevID = 8086:107d
Driver name = e1000e
Driver Version = 0.3.3.3.-k6

This download is valid for the product(s) listed below.





Comments are closed.